Aggiornamento Galaxy S4 I9505XXUEMJ3 Android 4.3 Samsung

Da Allmobileworld @allmobileworld
 

Nuova ROM leaked Aggiornamento Galaxy S4 I9505XXUEMJ3 Android 4.3 Samsung. Non si tratta della versione ufficiale ma di una leaked .

La ROM verrà rilasciata a breve su smartphone Samsung Galaxy S4 con aggiornamento via OTA ( Over The Air ) Noi consigliamo di attendere qualche giorno per poter scaricare la versione ufficiale.

Qui nel seguito potrete trovare le principali informazioni sulla nuova release della ROM basata su Android 4.3.

  • Model: GT-I9505
  • Country: Open Asia
  • Version: Android 4.3
  • Changelist: 1840064
  • Build date: Tue, 8 Oct 2013 23:29:05 +0000
  • Product Code: OLB
  • PDA: I9505XXUEMJ3
  • CSC: I9505OLBEMJ2
  • MODEM: I9505XXUEMJ3
  • Download: I9505XXUEMJ3_I9505OLBEMJ2_OLB.zip

NOTE

  • - This firmware will WIPE your device (Perform a backup before flashing)
  • - This test firmware will NOT increase your binary counter NOR void your warranty.
  • - This test firmware will NOT trigger your KNOX Warranty Counter (If it’s 0×0 before flashing, it will remain 0×0 after flashing and vice versa).
  • - This test firmware is a pre-release firmware and not official from Samsung.
  • - We have fully tested this firmware and this firmware works perfectly as any other official firmware.

INSTRUCTIONS

  • - Extract (unzip) the firmware file
  • - Download Odin3 v3.09 (From here or here)
  • - Extract Odin .ZIP file
  • - Open Odin3 v3.09
  • - Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
  • - Connect phone and wait until you get a blue sign in Odin
  • - Add AP_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
  • - Add BL_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
  • - Add CP_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
  • - Add CSC_OLB_I9505OLBEMJ2_1765174_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
  • - Make sure re-partition is NOT ticked
  • - Click start button, sit back and wait a few minutes.
  • - If you encounter any issues with the firmware (Any FC, Bootloop etc)
  • - Boot into recovery mode (Home+power+vol up)
  • - Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
  • - Then choose reboot and you should be good to go!

Video della precedente leaked:

from

Potrebbero interessarti anche :

Possono interessarti anche questi articoli :