Magazine Informatica

Disponibile il nuovo update leaked I9505XXUEMJ3 Android 4.3 per Galaxy S4

Creato il 14 ottobre 2013 da Toxico @liquidcoolingx2

 

Giunge sul web un nuovo update leaked per Galaxy S4 basato sul firmware  Android 4.3 I9505XXUEMJ3. Non si tratta di un aggiornamento ufficiale Samsung ma di un firmware che sarà molto simile alla versione definitiva.

Samsung-Galaxy-S4-15_h_partb

  • Model: GT-I9505
  • Country: Open Asia
  • Version: Android 4.3
  • Changelist: 1840064
  • Build date: Tue, 8 Oct 2013 23:29:05 +0000
  • Product Code: OLB
  • PDA: I9505XXUEMJ3
  • CSC: I9505OLBEMJ2
  • MODEM: I9505XXUEMJ3
  • Download: I9505XXUEMJ3_I9505OLBEMJ2_OLB.zip

NOTE

  • - This firmware will WIPE your device (Perform a backup before flashing)
  • - This test firmware will NOT increase your binary counter NOR void your warranty.
  • - This test firmware will NOT trigger your KNOX Warranty Counter (If it’s 0×0 before flashing, it will remain 0×0 after flashing and vice versa).
  • - This test firmware is a pre-release firmware and not official from Samsung.
  • - We have fully tested this firmware and this firmware works perfectly as any other official firmware.

INSTRUCTIONS

  • - Extract (unzip) the firmware file
  • - Download Odin3 v3.09 (From here or here)
  • - Extract Odin .ZIP file
  • - Open Odin3 v3.09
  • - Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
  • - Connect phone and wait until you get a blue sign in Odin
  • - Add AP_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
  • - Add BL_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
  • - Add CP_I9505XXUEMJ3_1840064_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
  • - Add CSC_OLB_I9505OLBEMJ2_1765174_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
  • - Make sure re-partition is NOT ticked
  • - Click start button, sit back and wait a few minutes.
  • - If you encounter any issues with the firmware (Any FC, Bootloop etc)
  • - Boot into recovery mode (Home+power+vol up)
  • - Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
  • - Then choose reboot and you should be good to go!

Potrebbero interessarti anche :

Ritornare alla prima pagina di Logo Paperblog

Possono interessarti anche questi articoli :